Free gusset DXF generator
Type a gusset's two legs and, if you want one, a corner clip, and Nestor draws the triangle gusset and gives you its DXF, free, in inches or millimeters.
Make your gusset
How it works
- Type the sizes in inches or millimeters. The part is drawn to scale as you type.
- If a size can’t work, such as a hole off the edge or two holes overlapping, the generator says what to change.
- Download the DXF, free. With a free account, save it to your parts library or nest it on a sheet in Nestor.
Questions
What is the corner clip?
A small 45 degree cut across the square corner, so the gusset clears the weld bead where the two plates it joins meet. Leave it empty for a sharp corner.
Is it free?
Yes. Drawing a part and downloading its DXF is free and needs no account. With a free Nestor account you can also save the part to your parts library, or send it straight to Nestor's nesting tool to nest it on a sheet.
Inches or millimeters?
Either. Type sizes in inches (fractions such as 3/4 or 6 1/2 work) or in millimeters, and the DXF is written in the unit you pick, with its units set in the file so CAM software opens it at the right size.
What is in the DXF?
Only the cut lines: the outline and the holes, on one layer, as circles, straight lines and true arcs (rounded corners are arcs, not short straight pieces), in an AutoCAD R12 DXF, the version cutting software opens most widely.
Does it check the part?
Yes. The DXF can't be downloaded while a hole runs off the edge, holes overlap, or less than 1/16 in of metal is left between two cuts or a cut and an edge; the generator says what to change.
More shapes
Nest it next: Nestor’s free nesting tool lays DXF parts out on your sheets for laser, plasma, waterjet and router.